VIEW FULL VERSION: Link
Title: Bucket Mould Is One Of Our Most Important Injection Molds
Tags: Drawer Mould,Bucket Mould
Blog Entry:   Bucket Mould is one of our most important injection molds. Our  Bucket Mould  includes thin-walled bucket molds, food bucket molds, bucket molds, cylinder bucket molds, square bucket molds, rectangular bucket molds, industrial buckets, and bucket molds, and buckets. Molds, industrial paint bucket molds, fishing bucket molds, packaging bucket molds, trash bucket molds, cement bucket molds, plastic bucket molds,  Drawer Mould,  and other bucket molds.   First of all, mold design and structure   High-quality mold structure is a prerequisite before qualified mold manufacturing. We attach great importance to the analysis of mold structure, including draft angle, product surface microcosm, gate system design, exhaust design, cooling system design, etc. Prone problems will be solved through trial and error in the mold structure design process.   2. Two, die steel   In order to improve mold life and product quality, we have increased the hardness of mold steel through heat treatment. In order to prevent mold eccentricity, the steel we usually use is H13 (48-52HRC), 2316 (45-50HRC), etc. We use a whole piece of steel to make the bucket. The cooling system is very important. We adopt a single-circuit cooling method and set up evenly distributed water channels as much as possible. In order to enhance the cooling effect, BeCu can be inserted into the core and cavity.   Our bucket mold uses air assist, ejector plate, and center ejector for demolding (release in two steps). In order to improve the cooling performance, there is also a water channel in the center.   All small sliders will be nitrided to increase hardening.   Maintaining mold maintenance is very important. We should check to make sure that the water channel and air circuit are unlocked. Lubricate the muffler and clean the scraper and center ejector regularly.   3. Third, mold cooling system   The design of the cooling system is a relatively tedious task, that is to consider the uniformity and cooling effect of cooling, but also to affect the entire mold structure, determine the exact location and size of the cooling system; and the cooling of key locations, such as Movable plates or inserts, side slides, and side cores; standard cooling element design and selection of cooling standard components. Micon Plastic Mould analyzes a series of factors when starting the mold design. Each part of the mold has circulating water flow, which reduces cooling time, improves production efficiency, and greatly reduces production costs.