Title: Do You Know How To Glue Pvc Celuka Board?
Tags: 4x8 pvc foam sheet PVC celuka board
Blog Entry: Step 1 Dry-fit the PVC celuka board you are joining carefully before you apply any glue. Mark the exact positions you need to place them, using a pencil. The glue has a very short open time -- less than a minute -- and you have to work quickly once you apply it. Step 2 Separate the boards and spread solvent-weld glue liberally on both surfaces using the applicator that comes in the container. Step 3 Press the boards together immediately after spreading the glue, and clamp them together with C-clamps or bar clamps. Tighten the clamps enough to close the joint. Avoid excessive pressure, or the glue may soften too much plastic and the boards may deform. Step 4 Leave the boards clamped until the glue dries, which takes two to three hours. Chip away any dried glue that squeezed out of the joint with a chisel after you remove the clamps. The 4x8 pvc foam sheet is also one of our products, welcome to your come and purchase!